Saving Application Measurement Results To Diskette; Figure 177 The File Name Editor - Agilent Technologies 8163A Manual

Recording Measurement Results
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition
All manuals and user guides at all-guides.com
Saving Application Measurement Results to
Diskette
If you are using the Agilent 8164A/B Lightwave Measurement System,
you can save application measurement results to diskette by completing
the following instructions:
1 Perform any of the following applications as described above:
• "The Logging Application" on page 242,
• "The Stability Application" on page 254, or
• "The PACT Application" on page 266.
2 Move to the Analysis Screen.
3 Insert a floppy disk in the diskette drive of your Agilent 8164A/B Lightwave
Measurement System.
4 Press [Menu].
5 Move to one of the following options:
• <Save Ascii File>, the data will be saved in Ascii-text format, that can be
opened by all text editors.
• <Save CSV File>, the data will be saved in CSV format, that can be opened
by Microsoft Excel.
6 Press Enter.The File Name Editor, as shown in Figure 177 , appears.

Figure 177 The File Name Editor

Applications
285