Available Software Packages - Mitsubishi Electric MELSEC iQ-R Series User Manual

5.3

Available Software Packages

To configure the settings of the RJ71EIP91, the engineering tool and EtherNet/IP Configuration Tool are required.
Software
GX Works3
EtherNet/IP Configuration Tool
Profile of the RJ71EIP91
Profile is the data in which the information (such as models) of the connected devices is stored.
The profile of the RJ71EIP91 is automatically registered in GX Works3 at the installation of EtherNet/IP Configuration Tool.
If GX Works3 is installed when EtherNet/IP Configuration Tool has already been installed, the RJ71EIP91
cannot be added in GX Works3.
Install the software in the following order: GX Works3 → EtherNet/IP Configuration Tool.
5 SYSTEM CONFIGURATION
26
5.3 Available Software Packages
Supported version
Version 1.045X or later
Version 1.00A or later