5.2
Available Software Packages
GX Works3 and PROFIBUS Configuration Tool are required to configure the FX5-DP-M.
Software
GX Works3
PROFIBUS Configuration Tool
If GX Works3 is installed or upgraded in the system having PROFIBUS Configuration Tool, the parameters of
the FX5-DP-M may not be configured properly.
In such a case, uninstall PROFIBUS Configuration Tool → install or upgrade GX Works3 → install PROFIBUS
Configuration Tool again.
5 SYSTEM CONFIGURATION
44
5.2 Available Software Packages
Supported version
Version 1.050C or later
Version 1.02C or later