Available Software - Mitsubishi Electric MELSEC iQ-R Series User Manual

• USB devices can be used for a C Controller module with the firmware version '03' or later.
• Insert or connect peripherals to a C Controller module so that the specifications of both C Controller module
and peripherals are met.
• For information on the access via each Network module and the access using Ethernet communication,
refer to the following manual.
MELSEC iQ-R C Controller Module User's Manual (Application)

Available software

The following software can be used for the system of MELSEC iQ-R C Controller modules. ( The manual of each
software)
Software package
CW Configurator
CW Workbench
CW-Sim
CW-Sim Standalone
Wind River Workbench
GX Works3
GT Designer3
MT Works2
SW1DND-RCCPU-J
SW1DND-RCCPU-E
SW1DND-CWWR-E/EZ/EVZ
SW1DND-CWWSIMR-EZ
SW1DND-CWWSIMSAR-E

SW1DND-GXW3-J
SW1DND-GXW3-E
SW1DNC-GTWK3-J
SW1DNC-GTWK3-E
SW1DNC-MTW2-J
SW1DNC-MTW2-E
Version
Version 1.00A or later
Version 1.00A or later
Version 1.00A or later
Version 1.00A or later
Version 3.3
Version 1.007H or later
Version 1.126G or later
Version 1.110Q or later
3 SYSTEM CONFIGURATION
3.2 Peripheral Configuration
3
21