Appendices; Appendix 1 Remote I/O Signal; List Of Remote I/O Signals - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

APPENDICES

Appendix 1
Remote input (RX) is a signal that indicates the state of the FPGA module (such as control state and external input state). In
the CC-Link IE TSN communication mode, it is an input signal from the FPGA module to the master module. In addition,
regardless of the operation mode setting, it can be referenced by an external device via SLMP communication.
Remote output (RY) is a signal that gives various commands (such as control start/stop and external output) to the FPGA
module. In CC-Link IE TSN communication mode, output from the master module to the FPGA module. In standalone mode,
ON/OFF operation can be performed from an external device via SLMP communication.
Remote input signal (RX)
RX0 to RXF
RX10 to RX3F
*1
RX40 to RX6F
*1 This area is an I/O signal allocated when an extension module is installed.

List of remote I/O signals

The table below lists the assignments for the remote I/O signals of the FPGA module.
Do not use any "Use prohibited" remote I/O signals. Doing so may result in an accident due to an incorrect
output or malfunction.
Common
Remote input signals
Device number
RX0
RX1
RX2
RX3
RX4
RX5
RX6
RX7
RX8
RX9
RXA
RXB
RXC
RXD
RXE
RXF
Remote I/O Signal
Remote output signal (RY)
RY0 to RYF
RY10 to RY3F
*1
RY40 to RY6F
Name
FPGA controlling flag
Use prohibited
Parameter saving completion flag
Logging start flag
FTP transfer completion flag
FTP transfer error completion flag
FPGA control stop while data
collection flag
Logging control suspension flag
Use prohibited
Error flag
Remote READY
Use prohibited
Description
Common remote I/O signals for FPGA module models
Remote I/O signal specific to FPGA module model (external input/external
output)
Remote output signals
Device number
RY0
RY1
RY2
RY3
RY4
RY5
RY6
RY7
RY8
RY9
RYA
RYB
RYC
RYD
RYE
RYF
Name
FPGA control start request
FPGA control stop request
Parameter save request
Logging start request
FTP resend allowed
Use prohibited
Logging control suspend request
Use prohibited
Error clear request flag
Use prohibited
APPX

Appendix 1 Remote I/O Signal

A
463