For Cc-Link Ie Tsn Communication Mode - Mitsubishi Electric NZ2GN2S-D41P01 User Manual

9.2

For CC-Link IE TSN Communication Mode

Assure that the network parameters have been written to the CPU module of the master station. For the setting procedure for
the master station, refer to the following.
 User's manual for the master station used
Communication cycle interval setting
When using the FPGA module in CC-Link IE TSN communication mode, set the communication cycle interval as follows.
■When the CC-Link IE TSN Class of the FPGA module is CC-Link IE TSN Class B
Communication speed
Master station
1Gbps
100Mbps
*1 When using the FPGA module in this combination, set the "Communication Period Setting" of the FPGA module to "Low-Speed".
*2 When using the FPGA module in this combination, set the "Communication Period Setting" of the FPGA module to "Basic Period" or
"Normal-Speed".
*3 Use a TSN hub when communicating between Master station and FPGA module with different communication speeds.
■When the CC-Link IE TSN Class of the FPGA module is CC-Link IE TSN Class A
The Basic Period of the FPGA module (communication cycle interval setting) should be set to a value with a multiplier that
results in a value that is 2.5ms or more and 1.28s or less.
Item
Basic period (Communication period interval
setting)
Magnification
If the communication speed of the master station is 1Gbps and the communication speed of the FPGA module is 100Mbps,
set the communication period setting of the FPGA module to "Low-Speed".
Ex.
When the communication period setting of the FPGA module is set to "Low-Speed" in the network structure settings, and
"16x" is set for "Low-Speed" in the multiple period setting of the master station parameter
The range of the basic cycle that satisfies the conditions (the value of the communication cycle interval setting of the
parameter of the master station) is 156.25s to 80ms.
9 PARAMETER SETTING
132
9.2 For CC-Link IE TSN Communication Mode
Value that can be set
FPGA module
■When the value is set in increments of 1s
1Gbps
125.00s to 10000.00s
■When the value is not set in increments of 1s
One of the following values
31.25s, 62.5s, 125.00s, 250.00s, 500.00s, 1000.00s, 2000.00s, 4000.00s, or 8000.00s
*1*3
■When the value is set in increments of 1s
100Mbps
125.00s to 625.00s
■When the value is not set in increments of 1s
One of the following values
125.00s, 250.00s, 500.00s
*2
■When the value is set in increments of 1s
100Mbps
500.00s to 10000.00s and a value divisible by 2s
■When the value is not set in increments of 1s
One of the following values
500.00s, 1000.00s, 2000.00s, 4000.00s, or 8000.00s
Description
Setting values of the communication period interval setting of master station parameters
Magnification that is determined by the following master station parameters
• Setting values of the communication period setting for network configuration setting
• Setting values of the multiple period setting for master station parameters