Lan Card Parameters On Frm - Cabletron Systems SmartSwitch 6000 User Manual

LAN Card Parameters
Locally Admin. MAC Addr
Configuring Cards and Protocols
If the node is connected to a LAN after this record is created, or if the node
becomes disconnected from the LAN, the LAN connection must be ini-
tialized/re-initialized by opening the Lan Card Configuration record, then
pressing
[F7]
FRM is connected to the LAN before performing this operation.)
Table 4-8 LAN Card Parameters on FRM
Parameter
Type
Locally Admin MAC Addr
is a MAC address that will override the universally administered MAC address. If all
zeros are specified, the universal address will be used.
to send the configuration to the LAN interface. (Be sure the
Valid Values
Ethernet
000000000000–7ffffffffffff
Default Value
Ethernet
000000000000
4-17