Cabletron Systems SmartSwitch 6000 User Manual page 213

Systematic Redirection
Redirect on Busy
Redirect on Out of Order
Priority
1st, 2nd,etc. Path Configured
LP/Port
Redirection Address 0,1,etc.
Configuring Async Ports
will redirect (if ) all calls to the alternate subscribers specified by the Redirection
Y
Addresses. Consecutive attempts at call redirection will be made to each alternate sub-
scriber in the list, until the call is completed.
will redirect calls (if ) according to the Redirection Addresses if the primary sub-
Y
scriber device is busy.
will redirects calls (if
Y
scriber device is out of order.
prioritizes intra-nodal traffic; the higher the number, the higher the priority. (This pri-
ority has no effect on traffic exiting a node.)
A priority is also configured in Node Defaults, as well as for each logical port, SNA
PU, LLC2 host, Bridge port/LLC2 Interface, IP interface, IPX interface, and PVC
connection. The device processor in the node uses these priorities to help determine
the order in which it will process protocols.
When configuring priorities, be careful to consider the types of
traffic being routed on other connections in the node.
includes or excludes the associated LP/port as a routing path to the subscriber device.
At least one path must be specified.
identify the port(s) that make up the routing path(s).
are up to five subscribers that will be called according to the specified redirection
option.
) according to the Redirection Addresses if the primary sub-
10-17