Cabletron Systems SmartSwitch 6000 User Manual page 173

Bandwidth Allocation Group
Host MAC Address
Session Type
Configuring SNA
Avoid configuring parallel Bridge/LLC2 frame relay links
between two FRX/FRM devices if one path is in native LLC2
format and the other in some other format. Since the same inter-
faces are used for both protocols and the spanning tree will elim-
inate dual paths for bridged traffic only, a loop can be created,
causing a node failure.
assigns the interface to one of sixteen groups whose parameters regulate bandwidth
usage. See "Configuring Bandwidth Allocation Groups" in on page 6-6.
is the MAC address of the host or workstation to which the remote device needs to
connect.
if , means that LLC2 connections from the configured
Originated
can use this interface. If
interface.
, connections to the configured address can use this
Terminated
Host MAC Address
8-31