Configuring A Community Table; Snmp Community Table Menu - Cabletron Systems SmartSwitch 6000 User Manual

Configuring a Community Table

14-4
Up to 16 SNMP manager devices can gain access to the agent running in an FRX or
FRM. Each manager device has an associated "community" name, configured at that
device, that identifies it to agents and other managers. That name is included in each
SNMP request that comes into a node. The request will be accepted only if the com-
munity name is in the Community Table.
Press at the SNMP Configuration Menu to display the table.
[B]
C ommunity Table
A S eq B Name
1 name1
2 name2
3 name3
4 name4
5 name5
6 name6
7 name7
8 name8
9 name9
10 name10
11 name11
12 name12
13 name13
14 name14
15 name15
16 name16
Option::
Figure 14-2 SNMP Community Table Menu
To configure an entry, press the corresponding "
entry, Option: it, then press
deleted one will move up one in the list.
Nod e Name=nod e_xyz
CAcces sD D el
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
Read_write
[A],[A],[D],[B]
Seq
(and when asked to confirm). All entries below a
[D] [Y]
from Main Menu
" (sequence) number. To delete an
FRX/FRM 3.3 User Guide, Rev 04