Ip Ping Connectivity Test; Ip Ping Connectivity Test Menu - Cabletron Systems SmartSwitch 6000 User Manual

IP Ping Connectivity Test

On-line Operations
The IP Ping function sends packets to an IP host to determine whether the host is
reachable. Press at the Operations Menu to display the following:
[F]
IP Ping Conn ectivity Tes t
A I P Add ress
B I nter-Packet Time (secs)
Option::
Figure 16-2 IP Ping Connectivity Test Menu
To begin the test:
1. Press and enter an IP address of the host that will receive (and echo) the pings.
[A]
2. Make any desired change to the
(seconds). This is an interval between transmission of packets.
3. When the parameters are configured the way you want them, press
node will begin sending pings. As each ping is returned from the host, a message
will be displayed, noting the packet size and IP address of the host.
4. To stop sending pings, press
5. Press again to exit the test menu.
[F3]
Node N ame=nod e_xyz
100.100.100.100
1
[B],[F] from Main Menu
, within the range of
Inter-Packet Time
. Test statistics will be displayed.
[F3]
1–15
, and the
[F4]
16-15