Cabletron Systems SmartSwitch 6000 User Manual page 109

Default Window Size
Maximum Throughput Class
Default Calling Address
T20 Restart Timer
T21 Incoming Call Timer
T22 Reset Timer
T23 Clear Timer
DTE Restart Retry Count
DTE Reset Retry Count
DTE Clear Retry Count
Configuring Frame Relay
will be assigned to an incoming call setup packet if the packet does not include a
window size.
specifies the default throughput class that will be inserted into a Call Request packet
if Throughput Class Negotiation is not enabled or if a throughput class is not requested
in the Call Request. This value should not be higher than the line speed specified for
the physical port.
Valid values (in bits per second) are:
75 150
4800 9600
will be inserted into an incoming Call Request packet if the packet does not contain a
calling address.
will be started when the logical DTE issues a Restart Request, and stopped (and reset)
when a Restart Confirmation or Restart Indication is received. If the timer expires, the
DTE should retransmit the Restart Request.
will be started when the logical DTE issues a Call Request packet, and stopped (and
reset) when a Call Connected, Clear Indication, or Incoming Call is received. If the
timer expires, the DTE should send a Clear Request.
will be started when the logical DTE issues a Reset Request, and stopped (and reset)
when a Reset Confirmation or Reset Indication is received. If the timer expires, the
DTE should retransmit the Reset Request or a Clear Request.
will be started when the logical DTE issues a Clear Request, and stopped (and reset)
when a Clear Confirmation or Clear Indication is received. If the timer expires, the
DTE should retransmit the Clear Request.
is the number of times a Restart Request from the logical DTE will be transmitted.
(The DTE will stop issuing the request on receipt of a Restart Confirmation or Restart
Indication.) If the
Restart Retry Count
be initiated.
is the number of times a Reset Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Reset Confirmation, Reset Indication,
or Clear Request.) If the
should be initiated.
is the number of times a Clear Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Clear Confirmation or Clear Indi-
300 600 1200
19.2K 48K 64K
expires, restart and recovery procedures should
expires, restart and recovery procedures
Reset Retry Count
2400
6-27