Main Menu - Cabletron Systems SmartSwitch 6000 User Manual

15-2
Netlin k FRX S eries Version "n'n'n"
M A I N M E N U
A C onfiguration
B Operation
C S tatus Displays
D Events
E S tatis tics
F R ep orts
Option::
Figure 15-1 Main Menu
Menu items under entry A are described in Chapter 2. The following shows where to
find the remaining operations among the menus. The chapters where items are
described are shown in parentheses. Any item not followed by a chapter/appendix
number is described in the chapter/appendix shown following the next higher level.
B Operations
A On-Line Node Operations
A Remote Control
B Remote File Transfer
C Remote Software Update
FRX/FRM software.
D Local File Backup
Plus®) connected to the FRX4000's Console port.
E Set ZMODEM Path
(see next entry) for copying files to an FRX4000.
F Local File Restore
Procomm Plus) connected to the Console port.
G Transfer Backup directory to ZMODEM Workstation
database (that was backed up using On-Line Database Operations) to a PC
(running Procomm Plus) connected to the FRX4000's Console port.
H Transfer Backup directory from ZMODEM Workstation
transferred in item G above back to the FRX4000.
B On-Line Port Operations
A Disable a Port
B Disable a Range of Ports
line.
C Enable a Port
D Enable a Range of Ports
line.
E Quiesce a Port
taken off line when there are no active connections.
F Quiesce a Range of Ports
G Unquiesce a Port
(Chapter 16)
– allows control of a remote FRX/FRM.
– transfers files between nodes.
– updates a remote node to a new release of
– copies an FRX4000 file to a PC (running Procomm
– configures a path that will be used by
– copies a file to the FRX4000 from the PC running
(Chapter 16)
– Takes any physical or logical serial port in the node off line.
– Takes a specified group of same-type ports off
– Brings any physical or logical serial port in the node on line.
– Brings a specified group of same-type ports on
– Causes any physical or logical serial port in the node to be
– Quiesces a specified group of same-type ports.
– Cancels the
Quiesce a Port
Node Name=nod e_xyz
Local File Restore
– copies an entire
– copies the database
command (only if there are
FRX/FRM 3.3 User Guide, Rev 04