Configuring Bsc Batch Port Records; Bsc Batch Port Record - Cabletron Systems SmartSwitch 6000 User Manual

Configuring BSC Batch Port Records

Configuring BSC
Once the necessary Node, Line Processor, and protocol parameters have been con-
figured, press at the Port Configuration Menu (or
[A]
When prompted, enter:
LP number of the RLP containing the port:
FRX4000 or FRM. (The default is
Port number (see port locations in Chapter 5):
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See Table 9-2 on page 9-
10.) The following figure is an example of an existing port.
BSC Batch Port Parameters (s creen 1 of 2)
* RLP: 0 Port: 5 Link State: Linku p
* I/O: V.35
A Port Type
B Physical Port Interface
C Block ed Port Flag
D Line S peed
E Retransmiss ion Period (ms)
F Maximu m Retransmiss ion s
G Maximu m Bytes per Frame
H Gen erate Clock
I Rcv Clock (TT) from DTE
J Batch Parameters - Screen 2
K Su bscrib er I nformation - Screen 3
L On-Line S ystem Memory C hanges
Op tion :
Figure 9-3 BSC Batch Port Record
Pressing [J] lists more parameters, and pressing
lowing. (All BSC Batch parameters are listed in Table 9-2.)
[A], [C], [A]
0–7 for FRX6000,
.) (LP numbers are described in Chapter 4.)
0
. (The default is
0–7
N ode N ame=nodexyz
D atabase S ystem Memory
BS C Batch BS C Batch
V .35 V .35
N N
9600 bp s 9600 bps
2000 2000
5 5
4105 4105
Y Y
N N
Y
[A],[C],[A] from Main Menu
[K] displays a screen similar to the fol-
from the Main Menu.
0 only for
.)
0
9-9