Displaying Port Status; Port Status Display - Cabletron Systems SmartSwitch 6000 User Manual

Displaying Port Status

Information in this Display
Status and Statistics Displays
Press at the Status Displays Menu to display the status of all lines on this node:
[B]
Port Statu s D is play (Page 1)
L P Type PPS
0 0 X25 62
0 2 X25 112
0 4 SN A 110
1 0 AS Y 0
Figure 17-2 Port Status Display
If the node has more than 32 ports, some of them will be displayed on sub-
sequent "pages" (up to 18 total) of the above menu. Press
them.
are the LP and port numbers
L P
is the port type:
Type
= Frame relay
FRL
= BSC Batch
BSI
= 802.3
8023
PPS is packets per second passing through the port.
is the number of virtual connections currently in use.
Conn#
State : Linkup Level 2 is up. (For frame relay PVCs, this state means that LMI
is running.)
Level 2 is up and level 3 is starting its initial handshake sequence.
Restarting
The line is up and ready to establish a connection or transfer data.
Operational
The link has been broken by the
Disabled
On-Line Control menu).
: For X.25, level 1 is up but level 2 cannot be established. For SNA
Disconnect
HPAD, no XID or SNRM command frame has been received for
any link address configured for the HPAD subscriber.
Nod e Name=n ode_xyz
C onn# State L P Typ ePPS Con n#State
4 Operational0 1 X 25127 12Operational
7 Operational 0 3 X 25 60
3 Operational 0 5 X 25 87
0 Disab led 1 1 X 25 88
= X.25
X25 SNA
= Async PAD
ASY LOG
= 802.5.
8025
6Operational
5Operational
4Operational
[C],[B] from Main Menu
[PgDn]
= SNA = BSC Interactive
BSI
= Logical = Ethernet
Eth
operation (at the
Disable Port
to display
17-3