Frame Relay Module; Rlp And Protocols - Cabletron Systems SmartSwitch 6000 User Manual

Frame Relay Module

RLP and Protocols

The Line Processor file contains this information for the RLP in an FRM:
Status (Installed, Configured)
Amount of memory installed (always 8MB)
Type(s) of Line Interface Cards
Configured and loaded protocols
The terms "LP" and "RLP" are interchangeable.
To access the LP screens, press
To configure a protocol, press
an LP number, type
0 [Enter]
numbers in an FRX6000; however, since the FRM has only one LP, it is set to the
lowest number, .)
0
, then from the Main Menu.
[A] [B]
at the LP Configuration Menu. When prompted for
[B]
. (The RLP has switches that allow setting different LP