Cabletron Systems SmartSwitch 6000 User Manual page 262

DLCI
Format
Bandwidth Allocation Group
Host MAC Address
Session Type
13-16
matches the connection with an interface at the remote end of the link.
Make sure the DLCI is not part of a frame relay DLCI backup
group. (See Chapter 7.) Also make sure that the DLCI is dif-
ferent than the one configured for the physical port in the frame
relay PVC record.
is the RFC1490 encapsulation method used for bridged traffic. Note that specifying
8023_TB will add an Ethernet header to the frame, and 8025_SRB will add a Token
Ring header.
assigns the interface to one of sixteen groups whose parameters regulate bandwidth
usage. See "Configuring Bandwidth Allocation Groups" on page 6-6.
is the MAC address of the LLC2 host in the node.
if , means that LLC2 connections from the configured
Originated
can use this interface. If
interface.
, connections to the configured address can use this
Terminated
Host MAC Address
FRX/FRM 3.3 User Guide, Rev 04