Setting The Date And Time; Date And Time Parameters - Cabletron Systems SmartSwitch 6000 User Manual

Setting the Date and Time

Configuring Node Parameters
Various operations and reports record the current date and time, as recognized by the
originating device. This operation allows changing one or both, to assure that all
devices in a network are synchronized.
Press at the Node Configuration Menu (or
[B]
date and time as currently recognized by the FRX/FRM will be displayed, and you will
be asked:
Do you want to change the date?
leave it as is. If changing the date, enter the correct information, noting the values in
Table 3-1. After the date, change (or leave) the time in the same way as the date.
Table 3-1 Date and Time Parameters
Parameter
Date
Month
Day
Year
Time
Hour
Minute
Second
[A], [A], [B]
Press
Valid Values
Y/N
1–12
1–31
1980–2099
Y/N
0–23
0–59
0–59
from the Main Menu). The
to change the date or
[Y]
Default Value
N
1
1
1997
N
0\
0
0
to
[Enter]
3-3