Ipx Packet Filter Parameters - Cabletron Systems SmartSwitch 6000 User Manual

Server Name
Network Address Value
Node Address Value
Socket Address Value
Filter Name
Packet Type Value
12-6
identifies a specific server whose incoming/outgoing packets will be affected by the
SAP filter.
is an IPX network number assigned to the network containing the server identified by
.
Server Name
identifies the node to which the filter will be applied.
is an IPX socket number that identifies a process or protocol. Some Novell socket
numbers are:
= NCP Process
0451
= NetBIOS Process
0455
Table 12-4 IPX Packet Filter Parameters
Parameter
Filter Name
Packet Type Value
Packet Type Mask
Destination Network Value
Destination Network Mask
Destination Node Value
Destination Node Mask
Destination Socket Value
Destination Socket Mask
Source Network Value
Source Network Mask
Source Node Value
Source Node Mask
Source Socket Value
Source Socket Mask
helps the user identify the filter. The name is not used by the software.
identifies the packet type:
= unknown packet type
00
= RIP packet
01
= SAP Process
0452
= Diagnostics Process
0456
Valid Values
1–31 characters
0–ff (1 byte)
0–ff (1 byte)
0–ffffffff (4 bytes)
0–ffffffff (4 bytes)
0–ffffffffffff (6 bytes)
0–ffffffffffff (6 bytes)
(2 bytes)
0–ffff
(2 bytes)
0–ffff
(4 bytes)
0–ffffffff
(4 bytes)
0–ffffffff
(6 bytes)
0–ffffffffffff
(6 bytes)
0–ffffffffffff
0–ffff (2 bytes)
0–ffff (2 bytes)
= RIP Process
0453
Default Value
none
ff
ff
ffffffff
ffffffff
ffffffffffff
ffffffffffff
ffff
ffff
ffffffff
ffffffff
ffffffffffff
ffffffffffff
0451
0451
FRX/FRM 3.3 User Guide, Rev 04