Lan Interface; Lan Card Configuration Record; Lan Interface Parameters On Frx4000 - Cabletron Systems SmartSwitch 6000 User Manual

LAN Interface

LAN Interface Parameters
Locally Admin. MAC Addr
Ring Speed
Configuring Cards and Protocols
Each FRX4000 contains a built-in LAN interface, either Ethernet or Token Ring
(depending on the model). To configure the interface, press
ration Menu. When prompted for an
default of ).
0
LAN Card Configuration
* In terface Numb er: 0
* Type
B Locally A dmin MA C A ddr
C Ring Speed
Op tion :
Figure 4-3 LAN Card Configuration Record
Item C (
Ring Speed
Table 4-2 LAN Interface Parameters on FRX4000
Parameter
Locally Admin MAC Addr
1
Ring Speed
Token Ring FRX4000 only.
1
is a MAC address that will override the universally administered MAC address. If all
zeros are specified, the universal address will be used.
specifies the speed of the ring to which the interface will connect.
Interface Number
N ode Name=nodexyz
Tok en Ring
400000000001
16 MBits/sec
[A],[C],[C]
) will not be displayed if
Valid Values
000000000000–7ffffffffffff
4 MBits/sec or
at the Port Configu-
[C]
, press (accepting the
[Enter]
from Main Menu
is .
Type Ethernet
Default Value
000000000000
16 MBits/sec 16 MBits/sec
4-5