Configuring Subscriber Addresses; Typical Svc Subscriber Screen - Cabletron Systems SmartSwitch 6000 User Manual

Configuring Subscriber Addresses

Configuring Async Ports
This operation creates records for the called and calling addresses that will be used in
call setup. To complete the connection, the software must recognize where the call is
coming from (calling address) and where it is going (called address).
To display a list of current Subscriber IDs (addresses), press
Routing Paths Menu (or
To add or change a Subscriber record, press
Menu. When prompted, enter a Subscriber ID of up to 15 digits. (ID conventions are
described in Appendix A.
S VC Sub scriber Maintenance
* Sub scriber ID
A Sub scriber Name
B Routing Algorithm
C Systematic Redirection
D Redirect on Bus y
E Redirect on Out of Ord er
F Conn ection Priority
G Routing Path s
H Redirection Ad dres ses
Option:
Figure 10-3 Typical SVC Subscriber Screen
Pressing will display routing paths, which link the subscriber with one or more
[G]
ports. Pressing will display the addresses used for call redirection. (These
[H]
addresses are valid only if
first screen.) Parameters for all three screens are described following Table 10-4.
from the Main Menu).
[A], [D], [A]
[B]
0100012345
su b1
0, Rou nd Robin
N
N
N
0
[A],[D],[B]
is specified for one or more of items C, D, and E on the
Y
at the Connections and
[A]
at the Connections and Routing Paths
Nod e Name=n odexyz
from Main Menu
10-15