On-Line Sdlc Pu Operations; On-Line Sdlc Pu Operations Menu - Cabletron Systems SmartSwitch 6000 User Manual

On-Line SDLC PU Operations

16-16
Press at the Operations Menu to display the following:
[G]
On-Line S DLC PU Operation s
A D is able an SDLC PU
B D is able a R ange of SDLC PUs
C En able an SDLC PU
D En able a R ange of SDLC PUs
Option::
Figure 16-3 On-Line SDLC PU Operations Menu
These operations disable or enable the link station connection between the node and a
PU or a range of PUs (grouped by sequential port numbers).
Select the desired operation from the menu. When prompted:
If enabling or disabling a singl
on FRX4000 or FRM,
LP: 0
: .
Port 0–7
PU station address
If enabling or disabling a range of PUs, enter:
:
Starting LP
Starting port
:
Ending LP 0
Ending port :
e PU, enter:
on FRX6000.
0–7
: .
0–ff
on FRX4000 or FRM,
0
: .
0–7
on FRX4000 or FRM,
0–7 .
Nod e Name=nod e_xyz
[B],[G]
from Main Menu
on FRX6000.
0–7
on FRX6000.
0–7
FRX/FRM 3.3 User Guide, Rev 04