Cabletron Systems SmartSwitch 6000 User Manual page 303

Status and Statistics Displays
, etc. The signal names (with connector pin numbers in parentheses) are
TD(2)
listed as
transition between states). For different physical interfaces, the names
remain the same, but the numbers change.
If displaying signal information for a remote subscriber, press
(The display for a remote subscriber shows, by default, the current values at the time
you entered the LP number.)
On an FRX6000, pressing
If the next LP is not configured, the message
display. operates in a circular fashion; pressing
[F5]
display LP 0.
, , or (unknown: non-functional, unused, or in
ON OFF UNK
will bring up the display for the subscriber's next LP.
[F5]
LP not installed
to update the data.
[F2]
will appear in place of a
while displaying LP 7 will
[F5]
17-9