Configuring Lp And Port Statistics Thresholds; Port Statistics Configuration Menu - Cabletron Systems SmartSwitch 6000 User Manual

Configuring LP and Port Statistics Thresholds

Status and Statistics Displays
For each LP and port statistic, you can specify a threshold that, when crossed, causes
an alarm to be sent to the collecting node.
Press at the Statistics Menu. When prompted, enter:
[A]
Statistic level : L for LP or
: on FRX4000 or FRM,
LP 0
(if requested):
Port
A menu like the following Port Statistics example will be displayed.
Port S tatis tics (Thres holds)
LP: 0
Port: 1
A Received frames/Sec (*10)
B Tran smitted frames/Sec (*10)
C Retran frames/Sec (*10)
D FC S errors /S ec (*10)
E Logical rejects/Sec (*10)
F Tran smit error ratio
G Receive error ratio
H % R eceive p ort utilization
I % Trans mit port u tilization
Option:
Figure 17-13 Port Statistics Configuration Menu
Changing a threshold changes the database value. Press
change to system memory.
A threshold is either a number or a percentage, depending on the statistic. The valid
range for any statistic is
tistic crosses the threshold (in either direction), an alarm is generated.
P for Port.
on FRX6000.
0–7
.
0–7
Datab ase Sys tem Memory
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
(default = ). When the measured value for the sta-
0–65535 0
Nod e Name=n ode_xyz
[E],[A] from Main Menu
[F7] to write the
17-29