Cabletron Systems SmartSwitch 6000 User Manual page 352

18-12
Action: None; however, all users of this port should be made aware of the
disable.
432.
Node Under Remote Control
Severity: 4
Meaning: Self-explanatory.
Action: None.
433.
Remote Control Released
Severity: 4
Meaning: Self-explanatory.
Action: None.
434.
Remote Control CXN Clr cc = "n" dc = "n"
Severity: 4
Meaning: A remote control connection was cleared.
Action: Depends on the cause. (See Appendix D for a list of codes.)
435.
LG Buffer MALLOC Problem PKTs Lost
Severity: 2
Meaning: This applies to a debug tool used by service personnel, and will not
appear under normal operation.
Action: None.
436.
RCV Unknown Event Code from Net.
Severity: 2
Meaning: An unknown event was received from the network.
Action: None.
437.
RCV Invalid Event Format from Net.
Severity: 4
Meaning: The node has received an event with an invalid format.
Action: None.
438.
DOS Error Handler Exceeded Limit
Severity: 2
Meaning: The FRX6000/FRM was performing a DOS operation and, for some
reason, could not reach DOS.
Action: Reboot the node and watch for error messages during boot-up. If the
problem persists, contact Cabletron Systems Technical Support.
(See page 18-5.)
FRX/FRM 3.3 User Guide, Rev 04