Displaying Port Statistics; Port Statistics Display - Cabletron Systems SmartSwitch 6000 User Manual

Displaying Port Statistics

Information in this Display
17-26
is the number of frames retransmitted by the LP per second
Retransmitted frames
over the five-second reporting interval, multiplied by 10. If the
per sec (*10)
value is consistently greater than zero and there are no other
problems, you should increase the
Period
Port S tatistics Report
LP: 0
Port: 1
R ep ort Interval (sec): 5
S tart Time: 4/21/1997 09:41:49
C DSTATI STIC S NAME
A Received frames/Sec (*10)
B Tran smitted frames/Sec (*10)
C Retran frames/Sec (*10)
D FC S errors /S ec (*10)
E Logical rejects/Sec (*10)
F Tran smit error ratio
G Receive error ratio
H Percent Receive port u til
I Percent Transmit p ort util
F2:N ext F4:Clear Max F9: Stop Remote F10: Reboot R emote Others :Exit
Figure 17-11 Port Statistics Display
Pressing
[F2]
lowest port if the highest is already displayed. Pressing
(maximum) values to the
MAX
Received frames
per sec (*10)
Transmitted frames
per sec (*10)
Retran frames
per sec (*10)
FCS errors/sec (*10)
) in the Port record.
Node Name=nod e_xyz
CU RR MAXDATE TIME
248 256 4/21/199609:45:19
230 238 4/21/199609:45:19
0 8 4/21/199609:45:19
0 2 4/21/199609:45:19
0 2 4/21/199609:45:19
0 33 4/21/199609:45:19
0 10 4/21/199609:45:19
75 80 4/21/199609:45:19
75 80 4/21/199609:45:19
will display the next-higher port on the specified LP, or the
CURR
is the number of frames received by the port per second
over the five-second reporting interval, multiplied by 10.
is the number of frames transmitted by the port per second
over the five-second reporting interval, multiplied by 10.
is the number of frames retransmitted by the port per second
over the five-second reporting interval, multiplied by 10.
is the number of Frame Check Sequence (the same as CRC,
or Cyclic Redundancy Check) errors received on the port per
second over the five-second reporting interval, multiplied by
10. A value consistently greater than zero indicates line
problems.
timer (
T1 Retransmission
[E],[B] from Main Menu
[F4]
(current) values.
FRX/FRM 3.3 User Guide, Rev 04
will reset the