Cabletron Systems SmartSwitch 6000 User Manual page 346

18-6
305.
LP Msg Queued exceeded T:"n" C: "n"
Severity: 4
Meaning: The LP statistic
threshold (
value.)
Action: If this happens frequently, you may need to reroute some traffic.
306.
LP Rcv Frm/Sec exceeded T:"n" C:"n"
Severity: 4
Meaning: The LP statistic
threshold (
value.)
Action: If this happens frequently, you may need to reroute some traffic.
307.
LP Trn Frm/Sec exceeded T:"n" C:"n"
Severity: 4
Meaning: The LP statistic
threshold (
value.)
Action: If this happens frequently, you may need to reroute some traffic.
308.
LP Rej Frm/Sec exceeded T:"n" C:"n"
Severity: 4
Meaning: The LP statistic
threshold (
value.)
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
309.
LP Rtrn Frm/S exceeded T:"n" C:"n"
Severity: 4
Meaning: The LP statistic
threshold (
value.)
Action: If this happens frequently, check the line for noise, and check for
configuration errors on both the port and the connected device.
310.
LP % Run Time exceeded T:"n" C:"n"
Severity: 4
Meaning: The LP statistic
(
T:"n"
Action: If this happens frequently, you may need to reroute some traffic.
Number of Queued Messages
) that was set by the user. (
T:"n"
Received Frames/Sec (*100)
) that was set by the user. (
T:"n"
Transmitted Frames/Sec (*100)
) that was set by the user. (
T:"n"
Rejected Frames/Sec (*100)
) that was set by the user. (
T:"n"
Retransmitted Frames/Sec (*100)
) that was set by the user. (
T:"n"
Percentage of Run Time
) that was set by the user. (
has exceeded the
is the current
C:"n"
has exceeded the
is the current
C:"n"
has exceeded the
is the current
C:"n"
has exceeded the
is the current
C:"n"
has exceeded the
is the current
C:"n"
has exceeded the threshold
is the current value.)
C:"n"
FRX/FRM 3.3 User Guide, Rev 04