Cabletron Systems SmartSwitch 6000 User Manual page 90

Group "n" Excess Priority
Group "n" Use Excess Burst
6-8
both groups are assigned to IP interfaces. Under a full traffic load, Group 1 will be
allocated 60/130 (46%) of the available bandwidth, and Group 2 will be allocated 70/
130 (54%).
allows setting a priority for traffic within each group; the higher the number, the
higher the priority. The priority is generally applied to traffic that exceeds the spec-
ified percent of bandwidth.
will (if ) allow traffic that falls into the Excess Burst Size (B
Y
relay Port records) to be transmitted. Any packets exceeding B
FRX/FRM.
) (configured in frame
E
will be buffered in the
E
FRX/FRM 3.3 User Guide, Rev 04