Cabletron Systems SmartSwitch 6000 User Manual page 325

Frame relay module for mmac-plus
Hide thumbs Also See for SmartSwitch 6000:
Table of Contents

Advertisement

Status and Statistics Displays
is the number of datagrams received using an unknown or unsup-
Unkwn Protocol
ported protocol.
is the number of datagrams received that were discarded because
Pkt Too Small
the IP header would not fit into a single buffer.
is the number of datagrams delivered to an application (e.g.,
Pkts Delivered
SNMP) on this node).
is the number of datagrams received with a header size less than
Bad Hdr Length
the minimum IP header length.
is the number of datagrams generated/forwarded by this node.
Local Pkts Sent
is the number of datagrams received with a length other than the
Bad Pkt Length
length of the header.
is the number of datagrams dropped due to a situation such as lack
Pkts Dropped
of buffers.
is the number of datagram fragments received.
Pkt Fragments
is the number of complete datagrams properly reassembled at this
Total Reasmbled
node.
is the number of datagram fragments discarded because of tim-
Frag Time Out
eouts.
is the number of outgoing datagrams properly fragmented.
Pkts Fragmented
is the number of datagram fragments dropped because of dupli-
Frag Dropped
cation or lack of space.
is the number of outgoing datagram fragments created.
Frag Created
is the number of datagrams forwarded.
Pkts Forwarded
is the number of times fragmentation of an datagram was disal-
Can't Frag
lowed because the flag field did not allow fragmentation.
17-31

Advertisement

Table of Contents
loading

Table of Contents