Cabletron Systems SmartSwitch 6000 User Manual page 313

Status and Statistics Displays
Possible Flags are:
Static
Dynamic
LLC2
Native
Discovery Pending
Don't Forward
The entry is fixed in the software.
The entry was added when the address was received.
The address is used for terminated LLC2 traffic.
All SNA frames (identified by SAP multiples of 4)
will be handled by LLC2, rather than bridged
directly.
The addresses is accessible via a native LLC2 interface.
The MAC address was the destination address in the received
frame, and the FRX software is trying to find the correct
Bridge port for that address. (Therefore, the port will be iden-
tified as , or unknown, until it is discovered.)
Unk
Frames to the address will not be forwarded. Addresses with
this flag are destined for the local bridge, or are reserved func-
tional addresses defined in the 802.1d specification and IBM
Token Ring architecture.
17-19