Changing The Login Password - Cabletron Systems SmartSwitch 6000 User Manual

Changing the Login Password

3-2
The login password is used to gain access to menu operations. When software is
shipped to the customer, the password is
words are case sensitive.)
To change the password, press
from the Main Menu).
When prompted:
1. Enter the old password.
2. Enter the new password, up to 14 characters.
3. Enter the new password again for verification. If this password is not the same as
the entry in step 2, the system will reject the new password (and the old one will
remain valid).
. (Note the upper case—all pass-
NETLINK
at the Node Configuration Menu (or
[A] [A], [A], [A]
FRX/FRM 3.3 User Guide, Rev 04