Bsc Interactive Port Parameters; Bsc Interactive Port Record, Screen 3 - Cabletron Systems SmartSwitch 6000 User Manual

BSC Interactive Port Parameters

Configuring BSC
BSC In teractive S ubs criber In formation
* RLP: 0 Port: 5 Link S tate: Link up
* I /O:–V.35
A BC
Sq Local Su b.R emote Sub .A tcl
01 100101000000000200201000000000N
02 100101000000001211020100000000N
03 100101000000002212202010000000N
04 100101000000003203301000000000N
05 100101000000004231020100000000N
Select
Figure 9-2 BSC Interactive Port Record, Screen 3
(item H) lets you delete the remote subscriber that is currently
Del
highlighted. You will be prompted:
sequence number. Pressing
below it up one sequence number.
A BSC TPAD subscriber can specify only one remote device, which can be an HPAD
or an X.25 connection to the host. An HPAD subscriber can specify up to 16 remote
devices, any of which can be a TPAD or an X.25 connection to the host. Each con-
nection must be assigned a different local subscriber address.
You must also configure Device records for the attached BSC devices. See
"Configuring BSC Interactive Devices" on page 9-19.
Table 9-1 BSC Interactive Port Parameters
Parameter
Por t Type
Physical Port Interface
Blocked Port Flag
Line Speed
Retr ansmission Period
Maximum Retransmissions
Maximum Bytes per Frame
continued on next page
D E F G
Rtytm Rty# C onnI DDel
60 0 10
60 0 12
60 0 13
60 0 05
60 0 08
will delete that line and move all entries
[Y]
Valid Values
BSC-I
see explanation
Y/N
see explanation
(ms) 1–9999
1–99
25–4105
Node N ame=nodexyz
H
where
Delete "n," "n"
Default Value
(not valid here)
see explanation
N
9600
2000
5
4105
is the
9-3