Cabletron Systems SmartSwitch 6000 User Manual page 126

Mask Link Alarms
Maximum Packet Size
Default Packet Size
Maximum Window Size
Default Window Size
Maximum Throughput Class
Default Calling Address
T20 Restart Timer
T21 Incoming Call Timer
T22 Reset Timer
T23 Clear Timer
7-8
prevents (if enabled) transmission to the collecting node of the link alarms 400-406
(
Link Enabled, Link Disabled
is the maximum data packet size that will be allowed to pass through this port. A
packet size included in a call setup packet will be used, as long as it is smaller than the
maximum specified here.
will be assigned to an incoming call setup packet if the packet does not request a
packet size.
is the maximum number of unacknowledged packets per logical channel that can pass
through the port.
will be assigned to an incoming call setup packet if the packet does not request a
window size.
specifies the default throughput class that will be inserted into a Call Request packet
if Throughput Class Negotiation is not enabled or if a throughput class is not requested
in the Call Request. This value should not be higher than the line speed specified for
the physical port. Valid values (in bits per second) are:
75 150
4800 9600
will be inserted into to an incoming Call Request packet if the packet does not contain
a calling address.
will be started when the port issues a Restart Request, and stopped (and reset) when a
Restart Confirmation or Restart Indication is received. If the timer expires, the port
will retransmit the Restart Request.
will be started when the port issues a Call Request packet, and stopped (and reset)
when a Call Connected, Clear Indication, or Incoming Call is received. If the timer
expires, the port will send a Clear Request.
will be started when the port issues a Reset Request, and stopped (and reset) when a
Reset Confirmation or Reset Indication is received. If the timer expires, the port will
retransmit the Reset Request.
will be started when the port issues a Clear Request, and stopped (and reset) when a
Clear Confirmation or Clear Indication is received. If the timer expires, the port will
retransmit the Clear Request.
, etc.)
300 600
19.2K 48K
1200 2400
64K
FRX/FRM 3.3 User Guide, Rev 04