Configuring Frame Relay Pvcs Across The Node; Frame Relay Pvc Configuration - Cabletron Systems SmartSwitch 6000 User Manual

Configuring Frame Relay PVCs Across the Node

6-32
An FRX4000 or FRX6000 PVC is a "permanent" connection between two physical
ports in a node. This allows communication between the attached devices as soon as
they are powered up, without the need to first establish a connection.
To display a list of current PVCs, press
from the Main Menu). The display will list PVCs of all supported types: frame
[E], [A]
relay, X.25, async, async-to-X.25, and IP over X.25.
To add or change a PVC, press
digit , which is simply a number unique to this connection, that identifies
Connection ID
the PVC.
PV C Maintenance C onnection ID 1
A PVC Type
B C onnection Priority
C onnection Between Frame Relay Port...
C Primary N ame
D Primary D LCI
E Primary LP
F Primary Port
an d Frame Relay Port...
G S econd ary Name
H S econd ary DLCI
I S econd ary LP
J S econd ary Port
K C ommitted Information Rate
L C ommitted Burst Size
M Excess Burst Size
Option:
Figure 6-10 Frame Relay PVC Configuration
It does not matter which end of the PVC is configured first.
at the PVC Configuration Menu (or
[A]
at the PVC Configuration Menu and enter a 1–4
[B]
Nod e Name=n ode_xyz
FRL to FRL
0
fsu b1
16
0
0
fsu b5
21
1
2
1000
500
1000
[A],[D],[E],[B]
from Main Menu
FRX/FRM 3.3 User Guide, Rev 04
[A], [D],