X.25 Port Cug Parameters; Cug Management - Cabletron Systems SmartSwitch 6000 User Manual

DTE Restart Retry Count
DTE Reset Retry Count
DTE Clear Retry Count

CUG Management

Configuring X.25
is the number of times a Restart Request from the logical DTE will be transmitted.
(The DTE will stop issuing the request on receipt of a Restart Confirmation or Restart
Indication.) If the
Restart Retry Count
be initiated.
is the number of times a Reset Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Reset Confirmation or Reset Indi-
cation.) If the
Reset Retry Count
tiated.
is the number of times a Clear Request from the logical DTE will be transmitted. (The
DTE will stop issuing the request on receipt of a Clear Confirmation or Clear Indi-
cation.) If the
Clear Retry Count
CUG (Closed User Group) is a privacy feature that allows creation of up to 100 groups
of users per port. Members of a CUG can communicate with other members, but
access to and from network users outside that CUG may be denied (determined by the
settings configured for
CUG index number is included in call packets, and is cross-referenced with the CUG
Index in the FRX/FRM software.
X .25 Port Parameters (screen 4 of 6)
* RLP: 0 Port: 5 Link State: Lin kup
* I/O:–V .35
A Preferential CUG Flag
B Preferential CUG
C Incoming A ccess Allowed
D Ou tgoin g Acces s Allow ed
E Add /C hange C UG
F Delete CU G
G Display all C UGs
Option:
Figure 7-2 X.25 Port CUG Parameters
expires, restart and recovery procedures should
expires, restart and recovery procedures should be ini-
expires, recovery procedures should be initiated.
Outgoing Access Allowed
Datab ase Sys tem Memory
N N
0 0
N N
N N
and
Incoming Access Allowed
Nod e Name=n odexyz
). The
7-9