Related Manuals for Cabletron Systems MMAC-Plus 9F116-01
Summary of Contents for Cabletron Systems MMAC-Plus 9F116-01
- Page 1 MMAC-Plus ™ Module Local Management 9F116-01 Module Specific Appendix 9031371...
- Page 2 Appendix 9F116-01 Module Specific Information Introduction This appendix contains local management information that is specific to the 9F116-01 Dual Port FDDI Bridge/Router Module. Default Interface Codes The Default Interface field on the General Configuration Screen allows you to enter a number (one through four).
- Page 3 9F116-01 Module Specific Information FNB Resource Configuration Codes The 9F116-01 Dual Port FDDI Bridge/Router Module provides connectivity between three interfaces: the two front panel interfaces and one of the FDDI rings on the backplane (FNB-1 or FNB-2). The FNB Resource Configuration Screen allows you to connect the module’s front panel interfaces to one of the chassis’...
- Page 4 Appendix Table 2. 9F116-01 MicroLAN Module FNB Resource Configuration Codes Configuration FDDI Connections Description No FDDI Connections The FNB-1 and the FNB-2 on the chassis’ backplane are not connected to the module’s bridge/router. FNB-1 The FNB-1 on the backplane is connected to the module’s bridge/router.
Need help?
Do you have a question about the MMAC-Plus 9F116-01 and is the answer not in the manual?
Questions and answers