Netview Parameters - Cabletron Systems SmartSwitch 6000 User Manual

NetView Parameters

Name
Local Subscriber ID
Remote Subscriber ID
Maximum Bytes per Frame
Configuring Node Parameters
Parameter
Name
Local Subscriber ID
Remote Subscriber ID
Maximum Bytes Per Frame
Local SAP Address
Local MAC Address
IDBLK
IDNUM
T1
T2
Ti
N3
Tw
N2
Priority
Bandwidth Allocation Group
On-Line Temporary Changes
Up to 10 characters can be entered, but only the first 8 will be recognized by NetView.
1
Be aware that some NVMTs are larger than 265 bytes, so you may want to set the value
2
higher.
In multiples of 4.
3
Must be less than the value for
4
delayed acknowledgment before
is the VTAM PU name that will identify the FRX/FRM as a NetView Service Point.
is a subscriber address for the local end of an LLC2 session established for a NetView
connection. An LLC2 Host record (described in Chapter 9) must be created, with
Session Type = Terminated
as specified here in the NetView parameters.
is a subscriber address for the remote end of an LLC2 session established for a
NetView connection. An LLC2 Host record (described in Chapter 8) must be created,
with
Session Type = Originated
ified here in the NetView parameters, and
specified in the NetView parameters.
ID
must correspond to the PIU size configured on the NetView host (parameter
MAXDATA of macro PU in VTAM).
Table 3-3 NetView Parameters
Valid Values
up to 8 characters
0–15 characters
0–15 characters
25–4105
(hex)
0–fc
0–ffffffffffff
0–fff
0–fffff
(x 100 msec)
0–250
100–5000
(sec)
1–50
1–127
1–127
0–255
0–9
1–16
Y/N
to ensure that the remote link station will receive the
T1
expires.
T1
and the same
Local Subscriber ID
,
Local Subscriber ID
Remote Subscriber ID
Default Value
1
none
none
none
2
265
3
04
000000000000
000
00000
(1 sec)
10
4
(msec)
100
30
1
1
8
0
1
Y
and
Remote Subscriber ID
= the
Remote Subscriber ID
= the
Local Subscriber
spec-
3-9