Cabletron Systems SmartSwitch 6000 User Manual page 223

LAN Card Number
Source Subscriber
Destination Subscriber
SVC Retry Timer
SVC Idle Timer
Max VCs to Establish
PVC Connection
Source Card/Port/DLCI
Configuring IP
identifies the LAN card that contains the interface. (Only
FRM, since FRX4000 has no LAN cards and FRM has only one.)
is a subscriber ID associated with the source IP interface port. (The port is the first
Routing Path configured in the SVC Subscriber record.)
is a subscriber ID associated with the destination IP interface port. (The port is the first
Routing Path configured in the SVC Subscriber record.)
is the frequency with which calls will be placed to try to establish a connection.
is a period that an IP connection remains active with no traffic before the connection
is cleared.
is the number of virtual circuits over which IP traffic will be transmitted in parallel.
simply states whether this interface is a PVC.
identifies the logical interface of this end of the frame relay link.
Make sure the physical frame relay port is not reserved for
backup DLCIs (as determined by the
parameter in the port record—see Chapter 6).
Also Make sure this DLCI is not configured as a Frame Relay
Backup DLCI or as part of an intra-nodal frame relay PVC.
is valid on FRX4000 or
0
For Backup Use Only
11-7