Configuring Llc2 Interfaces; Llc2 Interfaces Display - Cabletron Systems SmartSwitch 6000 User Manual

Configuring LLC2 Interfaces

Configuring SNA
LLC2 Interfaces records define the types and locations of the interfaces that will carry
LLC2 traffic to or from an FRX or FRM.
To display configured interfaces, press
R eview Bridge Ports/LLC-2 Interfaces
----------------------------------------------------------------------------------------------------------------------
I nterface N umberType RLP
-----------------------------------------------------------------------------------------------------------------------
1 Ethern et
2 Frame R elay
3 Frame R elay
4 Frame R elay
5 Frame R elay
PgUp , PgD n, F3:Exit, F9:Stop R emote, F10:Ab ort
Figure 8-9 LLC2 Interfaces Display
These interfaces can be used for either LLC2 or Bridging.
To configure an interface, press
prompted for an interface number (which is merely a sequential number to identify the
interface):
If modifying an existing record, enter the interface number:
If creating a new record, press
available sequential interface number.
The display depends on the interface type. Examples are shown in the following two
figures.
at the LAN Interfaces Configuration Menu:
[C]
PortD LCIFormat
0 1 30 N ative LLC -2
0 1 31 8025_S RB
0 1 32 8025_S RB
0 1 33 8023_TB
[A],[C],[F],[C]
at the LAN Interfaces Configuration Menu. When
[D]
, which will automatically specify the next
[Enter]
N ode Name=n odexyz
from Main Menu
.
0–95
8-27