Displaying Ip Interfaces - Cabletron Systems SmartSwitch 6000 User Manual

Displaying IP Interfaces

17-24
To display a list of active IP interfaces, press
(or from the Main Menu). The following will be displayed for each existing
[C], [F], [I]
interface:
Identifier used in the IP Route Display. Each name will be
Name
en"nnn"
is a frame relay interface, and
MTU Maximum Transmission Unit, the maximum size (in bytes) of
the data field that can be used to encapsulate an IP datagram for
transmission over the interface.
Bit-wise AND of the
Network
Network mask, used during routing to determine the portion of
Mask
the address associated with the network.
IP address of the local interface.
IP Address
Rem Address IP address of the remote device.
:
Flags U
If the screen is filled with information, you will be asked whether you want to display
more.
[I]
or where
fr"nnn,"
IP Address
= interface is operational.
at the Protocol Status Displays Menu
identifies an Ethernet interface,
en
is a sequential number.
"nnn"
and the .
Mask
FRX/FRM 3.3 User Guide, Rev 04
fr