Cabletron Systems SmartSwitch 6000 User Manual page 131

Inactivity Timer
Disconnect Timer
Line Setup Timer
Configuring X.25
will be started as soon as there are no active connections on a dial port. (It has no
function on a non-dial port.) If no new connections are established before the period
expires, the port will be disabled until the next call is placed, if a dial-out port, or the
expires (see next entry), if a dial-in port.
Disconnect Timer
is the length of time a dial-in port will remain disabled after expiration of the Inactivity
Timer.
is started when the port enters
response from the other end, the port will enter
state. If the timer expires before there is a
Linkup
Failed
state.
7-13