Cabletron Systems SmartSwitch 6000 User Manual page 350

18-10
406.
Operational
Severity: 2
Meaning: For all ports except those noted below, this means that the link is up.
For SNA TPAD, this means that the XID exchange has been per-
formed, and the XID data received in the response frame matches
the XID data configured for the TPAD subscriber. The link is ready
to establish an X.25 connection with the remote HPAD.
For SNA HPAD, this means that an XID or SNRM command frame
has been received for at least one of the link addresses configured for
the HPAD subscriber. The link is ready to establish an X.25 con-
nection with the remote TPAD.
Action: None.
407.
Call Clr LCN = "n" cc = "n" dc = "n"
Severity: 4
Meaning: Self-explanatory. See Appendix D for a list of cause codes (
diagnostic codes (
Action: Depends on the cause. If necessary, contact Cabletron Systems
Technical Support. (See page 18-5.)
408.
End of IPL
Severity: 4
Meaning: Self-explanatory.
Action: None.
409.
PVC is Up
Severity: 4
Meaning: Self-explanatory.
Action: None.
410.
PVC Reset
Severity: 4
Meaning: A Reset was sent on the PVC.
Action: None.
411.
Received Reset LCN = "n", cc = "n" dc = "n"
Severity: 4
Meaning: A Reset was received on the designated LCN, with the cause code
and diagnostic code
cc
Action: None.
412.
Received Reset Confirm
Severity: 4
).
dc
. (See Appendix D for a list of codes.)
dc
FRX/FRM 3.3 User Guide, Rev 04
) and
cc