Configuring Bsc Interactive Port Records; Bsc Interactive Port Record - Cabletron Systems SmartSwitch 6000 User Manual

Configuring BSC Interactive Port Records

9-2
Once the necessary Node, Line Processor, and protocol parameters have been con-
figured, press at the Port Configuration Menu (or
[A]
When prompted, enter:
LP number of the RLP containing the port:
FRX4000 or FRM. (The default is
Port number (see port locations in Chapter 5):
The display for an existing port will show the configured parameter values, while the
display for a new port will show default database values. (See Table 9-1 on page 9-3.)
The following figure is an example of an existing port.
BS C Interactive Port Parameters (screen 1 of 2)
* RLP: 0 Port: 5 Link State: Linku p
* I/O:–V .35
A Port Type
B Ph ysical Port I nterface
C Blocked Port Flag
D Lin e Sp eed
E Retran smission Period (ms )
F Maximum Retransmiss ion s
G Maximum Bytes p er Frame
H Generate Clock
I Rcv C lock (TT) from D TE
J BSC Type
K Activate Conn ection w /o poll
L Interactive Parameters - Screen 2
M Sub scriber I nformation - Screen 3
N On -Lin e Sys tem Memory C hanges
Option:
Figure 9-1 BSC Interactive Port Record
If BSC Type
Pressing lists more parameters, and pressing
[L]
lowing. (All BSC Interactive parameters are listed in Table 9-1.)
.) (LP numbers are described in Chapter 4.)
0
D atabase Sys tem Memory
BS C I nter BSC I nter
V .35 V.35
N N
9600 bps 9600 bps
2000 2000
5 5
4105 4105
Y Y
N N
1–tp ad 1–tpad
Y Y
Y
[A],[C],[A]
(item J) is 2-HPAD , item K will be
from the Main Menu.
[A], [C], [A]
0–7 for FRX6000, 0
. (The default is
0–7
N ode Name=n odexyz
from Main Menu
Answer Non-Configured
displays a screen similar to the fol-
[M]
FRX/FRM 3.3 User Guide, Rev 04
only for
.)
0
.