Cabletron Systems SmartSwitch 6000 User Manual page 366

18-26
Meaning: The timer defined by the parameters
Maximum Retransmissions
has expired.
Action: Check the PU to make sure it is operational.
713. S
DLC XID Retries exhausted
Severity: 2
Meaning: The retry limit for XID has been exceeded, and link establishment
has failed.
Action: None.
714.
SDLC Rem Stn sent FRMR - no reason
Severity: 2
Meaning: The remote station sent a Frame Reject with no reason.
Action: None.
715.
SDLC Remote RNR limit exceeded
Severity: 2
Meaning: The remote station is busy. This could be a hardware or buffer
problem in the remote device.
Action: Check the hardware and configuration at the remote device.
717.
SDLC Rem Tx Frame exceeds MAXDATA
Severity: 2
Meaning: A frame transmitted by the remote station exceeds the configured
value for
Action: None.
718.
SDLC Rem sent UA in NRM
Severity: 2
Meaning: The remote station sent a UA while in Normal Response Mode,
which is not allowed.
Action: None.
720.
SDLC No DSR on link
Severity: 2
Meaning: A necessary DSR was not received from the DCE.
Action: Check the modem to make sure it is operational.
721.
SDLC No CTS on link
Severity: 2
Meaning: A necessary CTS was not received from the DCE.
Action: Check the modem to make sure it is operational.
in the SNA Port record (see Chapter 8)
Maximum Bytes per Frame
No Response Poll Period
.
FRX/FRM 3.3 User Guide, Rev 04
and