Cabletron Systems SmartSwitch 6000 User Manual page 34

1-18
—copies a Port record's database values to another port's record,
F5: Copy Record
which can be convenient if several records in a node will have identical (or almost
identical) configurations. After you perform this operation, the "copied to" record will
be displayed, with the new database values. (The original record is automatically
saved.) Press to update the system memory values.
[F7]
You cannot copy a physical port's record to a logical port, or vice
versa.
—copies a Port record's database values to another port's record, then
F6: Move Record
deletes the original record. After you perform this operation, the "moved to" record
will be displayed, with the new database values. (The original record is automatically
saved.) Press to update the system memory values.
[F7]
You cannot move a physical port's record to a logical port, or vice
versa.
—in Node Defaults or Physical/Logical Port configuration, copies
F7: On-line change
values to
Database System Memory
values are described on page 3-9 for Node Defaults and page 5-4 for Ports.)
Memory
In IPX and Bridge Filter Definitions and Applications, all changes made on the screen
affect only system memory, so
—terminates a remote control connection, gives you the option of
F9: Stop Remote
rebooting the remote node, and returns control to the local operator.
or
F10: Abort Reboot Remote
—initiates a reboot of a local node.
Abort
—initiates a reboot of a remote node under local control. (You
Reboot Remote
must then press
[F9]
an FRX4000 will reboot that FRX4000.
Before aborting or rebooting a node, notify all users that the node
will be going down.
—abandons the changes you have made since the last save (via
ESC: Quit
and returns you to the previous menu.
Character: Select Option
—appears if an option has not yet been selected.
Select Option
—prompts you to press the letter corresponding to the field you want
Change Field
to change. Press the identifying letter, then type in the new information and press
.
[Enter]
, —allows you to display multiple screens (one at a time) for a record, if the
PgUp PgDn
record has more than one.
values or vice versa. (
must be pressed to update the database.
[F7]
:
to exit remote control.) Pressing
or :
Change Field
and
Database System
at the local terminal on
[F9]
or
[F3] [F7]
FRX/FRM 3.3 User Guide, Rev 04
)