X.25 Port Cug Parameters - Cabletron Systems SmartSwitch 6000 User Manual

CUG Parameters Table
Preferential CUG Flag
Preferential CUG
Incoming Access Allowed
Outgoing Access Allowed
7-10
To configure a CUG, press
CUG Index:
0-99
CUG number:
1-16383
any other requested information. (See Table 8-2.)
To delete a CUG, press
Pressing will display a list of all CUGs configured for this port, along with their
[G]
associated indices.
Parameter
Pr eferential CUG Flag
Pr eferential CUG
Incoming Access Allowed
Outgoing Access Allowed
specifies whether the port belongs to any CUGs.
is a default CUG for the port. Any calls that do not specify a CUG will default to this
one. A new port has CUG
that the subscriber belongs to no CUGs.
determines whether this port will be allowed to receive calls from outside its CUGs.
It is a CCITT requirement that a user allow incoming access to all or none (but not
some) of its CUGs.
determines whether this port will be allowed to make calls outside its CUGs. It is a
CCITT requirement that a user allow outgoing access from all or none (but not some)
of its CUGs.
and, when prompted, enter:
[E]
(the default is ), which is simply a reference to the CUG.
0
(the default is ), that will be associated with the index.
1
and enter the index of the CUG to be deleted.
[F]
Table 7-2 X.25 Port CUG Parameters
Valid Values
Y/N
0–99
Y/N
Y/N
specified here; this is not a valid number, and signifies
0
Default Value
N
0
N
N
FRX/FRM 3.3 User Guide, Rev 04