Ipx Rip Router Filter Parameters - Cabletron Systems SmartSwitch 6000 User Manual

Destination Network Value
Destination Node Value
Destination Socket Value
Source Network Value
Source Node Value
Source Socket Value
Filter Name
Router Address Value
Configuring IPX
= SAP packet
04
= SPX (Sequenced Packet Exchange) packet
05
= NCP (NetWare Core Protocol) packet
11
= Propagated packet, used for NetBIOS (an IBM protocol that performs
14
transport- and session-layer tasks)
is the network number of the destination node's network. The internetwork address is
the network number followed by the socket number.
is the physical address of the destination node. The node's internetwork address is the
network number followed by the node address followed by the socket number.
is the socket address of the packet's destination process.
is the network number of the source node's network.
is the physical address of the source node.
is the socket address of the packet's source process.
Table 12-5 IPX RIP Router Filter Parameters
Parameter
Filter Name
Router Address Value
Router Address Mask
helps the user identify the filter. The name is not used by the software.
identifies the router to which the filter will apply.
Valid Values
1–31 characters
0–ffffffffffff (6 bytes)
0–ffffffffffff (6 bytes)
Default Value
none
000000000000
00000000
12-7