Displaying Port Statistics; Using The Clear Counters Command - Cabletron Systems SmartSwitch 6000 User Manual

Oversize Packets (Read-only)
Displays the number of packets received with a valid CRC and whose size
exceeded 1518 data bytes (not including preamble).
Broadcasts (Read-only)
Displays the number of broadcasts transmitted and received.
Multicasts (Read-only)
Displays the number of multicasts transmitted and received.
Link Status (Read-only)
Indicates if the network or port is linked (Link) or not linked (No Link).
Admin Status (Read-only)
Indicates if the network or port is enabled (Enabled) or disabled
(Disabled).
PORT # (Command)
This command is used to select a port to view its statistics and those of its
associated Network. For details, refer to
CLEAR COUNTERS (Command)
This command sets all statistics counters to zero. For details on how to
use this command, refer to

5.32.1 Displaying Port Statistics

To display the statistics for any port, proceed as follows:
1. Use the arrow keys to highlight the PORT # command field at the
bottom of the screen.
2. Press the SPACE bar to increment or press the BACKSPACE key to
decrement the port number.
3. Press ENTER (the Port #, the Network #, and the statistics do not
change until ENTER is pressed).

5.32.2 Using the Clear Counters Command

To reset all the statistics counters of the selected port to zero, perform the
following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command
field at the bottom of the screen.
2. Press ENTER, the counters for the selected port are reset to zero.
6E123-50 and 6E133-49 User's Guide
Section
Section 5.32.2.
Repeater Statistics Screen
5.32.1.
5-109