Table of Contents
Advertisement
Configuration Tasks
The commands included in this implementation allow you to perform the following configuration
tasks:
Step
1.
2.
show lldp
Use this command to display LLDP configuration information.
Syntax
show lldp
Parameters
None.
Defaults
None.
Mode
Switch command, read‐only.
Task
Configure global system LLDP parameters
Enable/disable specific ports to:
•
Transmit and process received LLDPDUs
•
Send LLDP traps
•
Send LLDP-MED traps
Command(s)
set lldp tx-interval
set lldp hold-multiplier
set lldp trap-interval
set lldp med-fast-repeat
clear lldp
set/clear lldp port status
set/clear lldp port trap
set/clear lldp port med-trap
SecureStack B3 Configuration Guide 4-15
show lldp
Advertisement
Table of Contents
