Table of Contents
Advertisement
Measurement Applications (Sample Programs)
Reading Measurement Signal Level Monitor (IMON & VMON) Results
Reading Measurement Signal Level Monitor (IMON & VMON) Results
This application program reads measurement data in ASCII format using data
buffer.
The program of
below is inserted as a comment line in the program. For details on the VISA
functions, refer to the I/O Library Suite manual.
Configuration
Open Instrument Assigns a USB address or GPIB address to the I/O bus.
Setup Start
Measurement
Setup End
ErrorProc
ErrorCheck
SelectMode
136
Example 9-13
is described in detail below. Each explanation
Define Variables and initialize the program.
Presets the E4981A. Sets the trigger conditions of the
E4981A.
Reads the measurement signal level monitor values (IMON
and VMON) and then display the values.
Closes the I/O bus.
Displays an error number when an error occurs.
A subroutine to check whether an error occurs when the IO
Library Suite function is executed.
A subroutine to change assignment of the I/O bus and
address setting according to the connection type i.e. USB
or GPIB between the E4981A and a PC.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
Advertisement
Table of Contents
